SET-QM EV Charging Module
SET-QM EV Charging Module Setec Electric Vehicle Charger Johor Bahru (JB), Malaysia, Kuala Lumpur (KL), Singapore, Penang System, Solutions, Supplier, Supply | Saturn Pyro Sdn Bhd

SET-QM EV Charging Module

EV Charging Module Introduction

SETEC Power is providing state-of-the-art electronic models to be integrated in DC fast charging station, Each module is CHAdeMO, CCS and GB/T compliant and can be stacked in pile. Specialist in power conversion, SETEC Power is looking for to supply you with all the electronics to be integrated in your project for public charging stations. SETEC modules operate in master or BMS mode. Your public charging stations now communicate via CHAdeMO/CCS. Each stackable 10kW power module can be deployed in variety of use cases depending on the power outpit requirement (e.g. 20kW for the home or garage, or 50kW for a public charging station).

Features

  • Module with full resonance, double soft-switching principles of design, efficiency ⩾ 96%
  • Module with full isolation design. Module control part is fully isolated with the input and output of the main circuit. When some external factors will produce high voltage of module input or output part, internal module control circuit will not damage;
  • PCB with epoxy coating should be damnproof and dustproofp;
  • Multiple anti-reverse-current protection design to prevent the instrusion of various fault current phenomenon;
  • Input uses three-phase four-wire, three-phase equilibrium;
  • SCM module built by CAN / RS485 port communication. Monitoring system can monitor the module and operating condition;
  • With LCD display, real time display module output voltage, current, easy, operation and monitoring;
  • Regulators, current limiting function. It can be charged the battery groups and carried the load with the set voltage and current. When the output current is greater than the current limit, module automatically works on steady flow operation; when the output current is less than the current limit, it works on voltage  regulator condition;
  • Output voltage and current regulation. It can adjust the output voltage and the maximum current limit via background monitoring;
  • Work in parallel. The same model can work in parallel and share current. If one module failed, it will not affect the whole sysytem operation;
  • LCD shows module parameters, and Status Indicator;
  • Protection and alarm: input, short-circuit, over temperature, over voltage, and alarm indication.
Vehicle Charger / Car Charger / Electronic / Charging Stations / Setec / Savings / . SET-QM EV Charging Module from Saturn Pyro is the best available in Malaysia. High performance and cost effective Power Energy Meter with 4-quadrant measurement (consumption and generation). Suitable for Medium or Low voltage installations, in both 3 or 4-wire three-phase circuits, two-phase circuits with or without neutral, single-phase circuits or ARON connections. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore.

Pengecas Kenderaan / Pengecas Kereta / Elektronik / Stesen Pengecasan / Setec / Penjimatan /. SET-QM EV Charging Module dari Saturn Pyro adalah yang terbaik di Malaysia. Prestasi tinggi dan kos tenaga Tenaga Tenaga yang berkesan dengan pengukuran 4-kuadran (penggunaan dan generasi). Sesuai untuk pemasangan voltan sederhana atau rendah, dalam litar tiga fasa 3 atau 4-wayar, litar dua fasa dengan litar fasa tunggal atau ARON atau tanpa neutral neutral. Boleh didapati di Pulau Pinang, KL, Selangor, Johor, Sabah, Sarawak & di mana sahaja di Malaysia & Singapura. 


Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version