SPC603 - Data Converter
SPC603 - Data Converter Data Communication Johor Bahru (JB), Malaysia, Kuala Lumpur (KL), Singapore, Penang System, Solutions, Supplier, Supply | Saturn Pyro Sdn Bhd

SPC603

MULTI HOST ETHERNET TO SERIAL CONVERTER

▶SCADA Software Collects Data Over Ethernet
▶Browser Pages to Set Parameters
▶Reset Switch to Make Parameters to Default State
▶PoE to Avoid Separate DC Power Supply

About SPC603

SPC603 is an interface between RS232, RS485 or RS422 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. It has multiple master access on a single Ethernet port. This allows upto 12 masters to access the same devices on the serial bus. It can be configured as TCP Server or TCP Client. The browser based configuration utility allows the host IP address and serial settings to be changed. The SPC603 module offers true IEEE 802.3afcompliant (classification, Class 1) Power over Ethernet (PoE) functionality using a standard category 6 Ethernet cable to receive power from a PoE switch such as the FS108Pv3. If there is no PoE switch on site, the module will also accept power input from a DC adapter.

Features

▶ 12 simultaneous MODBUS TCP masters and 32 simultaneous requests for each TCP master
▶ 10/100 Mbps Ethernet port
▶ Browser based configuration utility
▶ TCP MODBUS protocols
▶ Serial Interface : RS232, RS485, RS422
▶ TCP Server/Client
▶ Configurable baud rate, parity, stop bits, IP address, TCP MODBUS server port no
▶ 12-48 VDC power supply
▶ Default parameters: Can be restored by pressing reset switch at power ON
▶ Mounting : DIN Rail / Surface
▶ Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version